Turn on or restart the computer, but the computer only displays an error when trying to get into Windows is an annoying thing. This article might help overcome them.
When the computer startup, and did not want to get into Windows with the error as dll not found or may display the blue screen can be caused by many things, among others:
A. Windows operating system files are accidentally deleted2. There is a virus, spyware or trojan that follow-loading when the computer startup3. There is a file (driver) is broken is broken, and when read by Windows fails4. There is damage to the hardware, especially in computer memory or hard drive5. Windows operating system installed is damaged or unfinished6. There is a setting in the BIOS setting is incorrect or the new modified
How to check and fix is:
A. Startup using the safe mode (press F5 when the computer was first want to get into Windows, then select safe mode). If the computer made it into Windows means no loading that can not be read by Windows correctly. Turn off loading by using msconfig on the startup command (called the start> run> msconfig)
2. If the computer can not get into Windows, the easiest way is repair Windows. The trick is to insert the Windows installation CD, continue to change the BIOS to startup via CD / DVD-ROM, after installation go to the install of Windows, Windows repair option selection. You can re-install Windows to a new folder or reformatting the hard drive if it fails to repair Windows.
3. First make sure you do not have to change BIOS settings before, if there is you should return to normal, if not forget you should select an option Loading BIOS defaults.
4. If the above steps fail all, there may be damage to your hardware. Damage is generally located on the memory and hard drive. VGA and mainboard may be damaged, but the probability is very small.
Note: Damage to the VGA card driver can also cause Windows can not enter. You have to startup in safe mode and uninstall VGA driver are damaged first, and only re-install the correct VGA driver when getting into Windows normally.
When the computer startup, and did not want to get into Windows with the error as dll not found or may display the blue screen can be caused by many things, among others:
A. Windows operating system files are accidentally deleted2. There is a virus, spyware or trojan that follow-loading when the computer startup3. There is a file (driver) is broken is broken, and when read by Windows fails4. There is damage to the hardware, especially in computer memory or hard drive5. Windows operating system installed is damaged or unfinished6. There is a setting in the BIOS setting is incorrect or the new modified
How to check and fix is:
A. Startup using the safe mode (press F5 when the computer was first want to get into Windows, then select safe mode). If the computer made it into Windows means no loading that can not be read by Windows correctly. Turn off loading by using msconfig on the startup command (called the start> run> msconfig)
2. If the computer can not get into Windows, the easiest way is repair Windows. The trick is to insert the Windows installation CD, continue to change the BIOS to startup via CD / DVD-ROM, after installation go to the install of Windows, Windows repair option selection. You can re-install Windows to a new folder or reformatting the hard drive if it fails to repair Windows.
3. First make sure you do not have to change BIOS settings before, if there is you should return to normal, if not forget you should select an option Loading BIOS defaults.
4. If the above steps fail all, there may be damage to your hardware. Damage is generally located on the memory and hard drive. VGA and mainboard may be damaged, but the probability is very small.
Note: Damage to the VGA card driver can also cause Windows can not enter. You have to startup in safe mode and uninstall VGA driver are damaged first, and only re-install the correct VGA driver when getting into Windows normally.
